5 Best Way To Paint Walls And Trim
Those paint advertisements make painting a home look like a piece of cake. All you need to do is grab a brush, a few rollers, and a bucket of paint, and you are good to go. However, this looks easy on paper only. When it comes to actually painting a house, there are a lot of factors that count.
These include choosing the right brush, and the perfect color, and utilizing the technical knowledge to complete the task. Moreover, many technicalities are involved in completing a paint job. You must know how to prepare the paint, prime the walls, apply the right amount of coat and trim the walls as needed. All in all, technicalities play their role in giving a perfect paint coat.
So, what are some of the best ways to paint walls? Let’s find out.
5 Ways To Paint Walls
Painting is not an easy task and a lot of tricks go into getting the job done. From painting a smooth coat to ensuring cleanliness during the work, painting needs to be done very meticulously and carefully.
Continue reading to find out the expert-approved ways of painting and trimming your walls.
1. Get All The Right Tools
Before starting the paint job, you first need to have all the right tools and equipment. Start with a good paintbrush. Take a flagged tip brush having nylon and polyester bristles. As for the handle, buy one with a wooden handle. This not only helps in holding it well but also lasts longer.
For the rollers, choose the soft foam rollers in either 14 inches or 18 inches. Hence, choose the one that can cover more area. To prepare the walls, you need to rub sandpaper over them.
The black sandpaper that is coated with silicon carbide is a good choice. For trimmed areas of the walls, make use of foaming sandpaper. As for the sandpaper grit, go with the 60 to 80 grit one for removing chipped paint while a 200 to 220 grit sandpaper for smoothing out the surface.
2. Paint First
It has been seen that many homeowners paint the walls initially and then move to trim. They also wait for the first coat to dry up and then apply the second one. However, it is recommended that you paint the woodwork first and then move toward painting the walls. This will give a better finish.
Who doesn’t like painted stripes? But you might think that you will mess it up yourself. However, if you go with the instructions, you can easily nail the striped wall paint. For this, you need to start by laying out a strip of blue painter’s tape. After this, mark the border between the two paint colors with caulk. Now, you can paint the stripes and later peel off the caulk when the paint is dry.
3. Paint Even Coats
Painting even coats is very crucial to get a professional finish. After you have painted a section of the wall, you need to smoothen it out. For this, apply the paint using the rollers in a certain direction. For instance, you can apply several coats in the vertical direction.
4. Load The Brush And Rollers
Another important tip to consider when painting the walls is to load the brushes and rollers to the right amount. Too little or too much paint on them will not give you the desired finish.
To load the brush with the right amount of paint, you should dip it just halfway into the paint. After dipping, remove the excess paint by stroking it lightly on the inside ends of the bucket. Then, start with a smooth upwards stroke, this will further remove any excess paint and give a smooth coat without any dripping.
Similarly, you should not dip the roller completely into the paint. You should dip it into the paint to the extent that the handle does not get any paint. Another expert tip for good results is to strain the paint into a bucket when it is left for a day.
5. Clean It All
When you are done with the paint job, now it is time to tidy up the area, clean any accidental drips, and wash the brushes and rollers. To clean the floors, you can try a hard bristle brush. As for the carpet, keep the area wet and blot the paint.
To clean your paintbrush, make use of warm water and soap. Put your brush under running warm water and clean it with soap. As for the dried paint, make use of a metal brush to comb out the dried paint.
How To Paint A Trim
Painting the trim can be a tricky task. However, if you follow just the right steps, it can be done easily without any mess.
Before painting the trim, make sure that the wall paint is completely dry. After this, you need to add painter’s tape along the edges of the trim. This will keep the paint on the trim and there will be no spots on the walls. Make sure that the tape is fixed and will not come off at any point. Now, you can paint the trim. For this, make use of a paintbrush rather than a roller. Once you are done painting, you can proceed to remove the tape. However, make sure that the paint is a bit wet otherwise it would come off with the tape.
And voila! You are done painting the trim.
Conclusion
Painting a house can be made easy if you have all the right tools and follow the expert-approved tips. For instance, start with buying a ladder that can reach the ceiling along with brushes and paint boxes. Once you have purchased all the raw materials, start painting a small section. After you have gained confidence and learned the technique, you can move on to painting the rest of the house. Hopefully, the tips discussed above will help you get your paint job done in no time.